Row houses are a signature of the Washington, DC area, from Capitol Hill brick to Baltimore-style rows and newer townhomes. They offer character, walkability, and often a great location, but they also have maintenance needs that detached homes don’t. Shared walls, flat roofs, narrow lots, and aging masonry all require attention. Understanding how a row house works helps you protect it, and it also helps you work with the neighbors who share its walls. Here’s a practical guide to caring for one.

Know What Makes a Row House Different

The defining feature is the party wall, a structural wall shared with the neighbor on one or both sides. It carries load, separates fire, and reduces sound, and it’s not yours alone to change. Most rows also have flat or low-slope roofs with a membrane and drains, a masonry front, and little or no side yard, so water has fewer places to go. Many have a rear addition built at a different time, sometimes with different quality, and an English basement that sits partly below grade. Older units may still have original plumbing, wiring, and plaster. Knowing which elements are shared and which are yours makes every maintenance decision easier. Exchange contact information with your neighbors, since problems like roof leaks and party wall moisture often involve both homes.

Protect the Roof and Drainage

A row house roof, usually flat, needs attention twice a year and after major storms. Walk it, or hire someone to, and look for ponding water, blisters, cracks in the membrane, and failed flashing at parapets, party walls, vents, and skylights, since those are common leak points. Keep drains, scuppers, and gutters clear of leaves and debris. Water that stands for more than a couple of days adds weight and shortens the roof’s life. Depending on material, flat roofs often last fifteen to twenty-five years. Because the roof edge often meets the neighbor’s, coordinate repairs along the shared parapet so flashing and coatings tie in properly. A roof coating could extend the life of a sound membrane, but it should go on only after repairs, and only when the surface is clean and dry.

Masonry and Party Walls: Row House Maintenance Basics

Brick on the front and sides takes weather directly, so inspect mortar joints each year. Check lintels above windows and doors for rust or sagging. Crumbling mortar, loose bricks, and white powder called efflorescence are signs of moisture. Repointing should use mortar matched to the age and softness of the brick, and it’s best done by an experienced mason. Don’t cut into the party wall for new openings, pipes, or beams without a structural engineer and a permit, since it carries load and provides fire separation. Look for moisture stains, cracks, or gaps where the party wall meets the roof or floors, and let the neighbor know if you see something that may affect them. Also check the parging, the thin cement coating at the base of the wall, since cracks there let water into the masonry below.

Manage Moisture in Basements and Rear Additions

Basements in an older row house often face dampness. Make sure downspouts discharge away from the foundation, the ground slopes away from the wall, and window wells are clear. A sump pump or a dehumidifier helps, and a small hygrometer shows whether humidity stays in a healthy range, and you should fix leaks at the source rather than only covering stains. Check rear additions where they meet the original building, since that joint can leak or settle, and look at the roof tie-in and flashing there. Ask about plumbing materials, because older homes may have galvanized or lead pipes, and ask the water utility about the service line. Have electrical upgrades done by a licensed electrician, and keep records of upgrades and permits, which help with future sales and insurance.

Frequently Asked Questions (FAQs)

Who is responsible for the roof of a row house?
Usually the owner of each unit, but shared elements may be covered by agreements or association rules. Check your deed and any association documents, so you know where responsibility lies.

How often should the brick be repointed?
Often every twenty-five to fifty years, depending on exposure and past repairs. Inspect mortar joints annually so you catch problems early.

Can I make changes to a shared wall?
Not without a structural engineer, a permit, and coordination with your neighbor. The wall carries load and provides fire separation, so changes affect both homes.

How can I reduce noise from neighbors?
Seal gaps, add insulation where possible, and use rugs and soft furnishings. A professional can recommend additional options for the party wall.

What should I ask before buying a row house?
Ask about the roof’s age and condition, party wall moisture, basement dampness, any additions and their permits, and what the plumbing and service lines are made of.

DMV Home Inspections offers home inspection services to homebuyers and sellers in the Washington DC metro area. Contact us to schedule an appointment.